| Technical Specification | |
| I/O Interface | |
| Power Input | DC: -40V~-57V, rated voltage -48V;
AC: 100V~240V, rated voltage 110V/220V; HVDC: 190~400V, rated voltage 240V/336V |
| Ports | 32* 100GE QSFP28 ports
1* RJ45 console port 1* RJ45 external management RJ45 port 1* USB port |
| Performance | |
| Bandwidth | 6.4Tbps |
| Packet forwarding rate | 2000Mpps |
| Memory | 8Gb |
| Flash memory | 512Mb |
| Packet cache | 32Mbit |
| MAC address table | 96K |
| Jombo frame | 9216Kbytes |
| VLANs | 4K VLAN |
| Standard | |
| Network Protocol | IEEE802.3 (Ethernet)
IEEE 802.3ae (10G Ethernet) IEEE 802.3by (25G Ethernet) IEEE 802.3ba (40/100G Ethernet) IEEE802.3x (Flow control) IEEE 802.3az (Energy efficient Ethernet) IEEE 802.3ad (Link aggregation) IEEE 802.1AB LLDP/LLDP-MED (Link layer discovery protocol) IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) IEEE 802.1Q (Virtual LAN) IEEE 802.1p (VLAN Label) IEEE 802.1X (User authentication) |
| Certificate | |
| Safety certificate | CE, FCC, RoHS |
| Environment standard | |
| Working environment | Operating temperature: -10~50°C
Storage temperature: -40~70°C Working humidity: 10%~90%, non-condensing Storage humidity: 5%~95%, non-condensing |
| Function indicator | |
| Indicator | ID (ID indicator), MST (Stack master/slave indicator), PWR (power indicator), RAN (System running indicator) |
| ID | Off: The ID indicator is disabled and is in the default state.
On: This indicator is used for on-site location. O&M personnel remotely control the ID indicator to turn on or off. |
| MST | Off: The device is not the master stack device.
On: The device is the main stacking device or the device that is not stacked. |
| PWR | On: Powered on.
Off: Powered off. |
| RAN | On: The device is powered on but the software is not running.
Flashing slowly: The device is running normally. |
| Port indicator | Flashing: The link is being transmitted.
Off: The link is down. |
| RESET botton | Press for less than 5 seconds to restart.
Press and hold for more than 5 seconds to restore factory Settings. |
| Physical specification | |
| Structure size | Product size: 440*420*44mm
Package size: 585*635*70mm Product weight: < 8KG |
| Packing information | Packing quantity: 5 PCS |
| Power voltage | Working voltage: AC100-240V 50/60Hz |
| Power supply | Max. 500W, 1+1 redundant power supply |
| Packaging list | Switch: 1PCS, Manual: 1PCS, Certificate: 1PCS, power cord: 1PCS, Rack ear 1 Pair |
| Software feature | |
| VLAN type | Support 4K VLANs; 1:1 and N: 1 802.1p-based VLAN Mapping; VLAN based on MAC, protocol and IP; Guest VLAN, Voice VLAN; QinQ, enhanced flexible QinQ |
| IP Routing | Support IPv4 and IPv6 static routes. GRE tunnel; Equal-cost routing; Policy routing |
| Multicast | Support IPv4 dynamic routing protocols such as OSPF, IS-IS, and BGP |
| Support IPv6 dynamic routing protocols such as OSPFv3, ISISv6, and BGP4+ | |
| Support IGMP, IGMP Snooping, MLD Snooping | |
| VXLAN | Support VXLAN Layer 2 switching, route switching, and Layer 3 gateway; EVPN VXLAN; IPv6 VXLAN over IPv4 |
| EVPN | Support EVPN; the RR function of MP-BGP EVPN; symmetric IRBs |
| Relability | Support STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE 802.1s) |
| Support BPDU protection, Root protection, loop protection; BDPU Tunnel. Supports cross-device link aggregation | |
| BFD sessions can be bound to static routes, VRRP, OSPF, IS-IS, BGP, and RIP | |
| Support two PSUs in redundancy mode, two sets of fans in redundancy mode, and power modules and fans in hot swap mode | |
| QOS | Support L2-L4 packet filtering based on MAC, IP, port, protocol, IP ToS, 802.lP priority, VLAN ID, and SVLAN ID |
| VLAN range filtering; Support time-based ACLs | |
| Support DLF storm suppression, multicast storm suppression, broadcast storm suppression | |
| Support port-based bandwidth limiting; stream/VLAN-based bandwidth limiting (single-speed two-color); the flow of single-speed three-color, two-speed three-color; flow-based priority scheduling and priority mapping | |
| Support SP/PQ, DRR, SP/PQ+DRR and other scheduling algorithms; queue tail drop, WRED and other queue cache management policies | |
| Each port supports 8* QoS hardware priority queues. Support 802.1p, DSCP/ToS priority | |
| IPV6 | Support Neighbor Discovery (ND) and PMTU |
| Support IPv6 Ping and IPv6 Telnet | |
| Support ACLs based on source IPv6 address, destination IPv6 address, Layer 4 port, and protocol type | |
| Support IPv4 and IPv6 dual stack; Support a variety of tunnel technologies | |
| Safety feature | Support hierarchical user rights management and hierarchical command line protection. 802.1x, RADIUS, and TACACS+ authentication |
| Support user level number limit; user binding (port, source MAC, source IP address access control); SNMP login terminal restrictions; SSH v2.0 | |
| Anti-ARP attacks, DDoS attacks; Support IP Source Guard; Support black hole MAC; Support number of MAC addresses limit | |
| Green energy saving | Support automatic fan temperature control, temperature monitoring, and fan alarm |
| Configuration &
maintenance |
Support terminal services such as Console, Telnet, and SSH |
| Support SNMPv1/v2/v3 and other network management protocols. Support common feature
standard MIB |
|
| Support NETCONF network management protocol | |
| Support FTP, TFTP upload, download files; Support unified management of logs, alarms, and debugging information. Support user operation log; Support RMON | |
| Support port mirroring, flow mirroring; BootROM upgrade, remote online upgrade, hot patch | |
پشتیبانی در ساعات اداری
نقد و بررسیها
هنوز بررسیای ثبت نشده است.